Pinza amperimétrica de verdadero valor eficaz con iFlex CAT III 1500 V 393 FC


The Fluke 393 FC Clamp Meter is specially designed for technicians working in high-voltage DC environments such as solar panels, wind power, electric railways, or data center battery banks for UPSs. The clamp can measure up to 1500 V DC, 1000 V AC, and up to 999.9 A DC or AC through the jaw. The included iFlex flexible current probe increases AC current measurements up to 2500 A. This clamp has a very fine jaw that will allow you to access cables found in high-density combiner boxes. The test leads are designed with your job in mind, and for CAT III 1500 Vdc as well.


Other essential functions:
IP54, ideal for working outdoors on solar panels or wind power systems. The iFlex probe can be twisted and turned in extremely small spaces and provides accurate current measurements. DC measurement with readings in kVA

Weight 0.52 kg
Dimensions 28.1 × 8.4 × 4.9 cm
  • Batteries: 2 AA IEC LR6 alkaline batteries.
  • Display: dual display with backlight.
  • Automatic shutdown: 20 minutes.
  • Accuracy: The specified accuracy refers to the year following the calibration, at operating temperatures of 18 to 28 °C with a relative humidity of 0 to 75%.
  • Accuracy specifications are of the type: ± ([% of reading] + [number of least significant digits]).
  • Temperature Coefficients: Add 0.1 x specified accuracy for each °C > 28 °C or < 18 °C.
  • AC Rating of Jaw: 999.9 A.
  • Clamp accuracy: 2% + 5 digits (10 to 100 Hz) and 2.5% 5 digits (100 to 500 Hz).
  • Jaw opening: 34mm.
  • Flexible current probe diameter: 7.5mm.
  • Operating temperature: -10 to 50 °C.
  • Storage temperature: -40 to 60 °C.
  • Operating altitude: 2000 meters.
  • Storage altitude: 12,000m.
  • General specifications: IEC 60529-1, pollution degree 2.
  • Measurement: IEC 61010-2-032, CAT III 1500 V / CAT IV 600 V and IEC 61010-2-033: CAT III 1500 V / CAT IV 600 V.
Download Specifications
SKU: Fluke 393 FC Categories: Fluke, Current clamps